神农架常绿落叶阔叶混交林凋落物养分特征

凋落物是联结陆地生态系统植物与土壤养分的重要媒介,了解凋落物养分特征有助于理解陆地生态系统物质循环的机理。该研究于2015年收集了神农架地区常绿落叶阔叶混交林的新鲜凋落物及现存凋落物,测定其不同器官中大量元素(C、N、P、K、Ca、Mg)的含量,据此分析其养分含量、养分归还量、养分储量及化学计量比的特征。结果发现:该常绿落叶阔叶混交林新鲜凋落物的C、K养分含量显著高于现存凋落物,N、P、Ca、Mg养分含量显著低于现存凋落物;其凋落物大量元素的养分归还量及养分储量大小顺序均为C Ca N Mg K P,分别为1569.84、52.44、34.82、6.24、5.24、1.30 kg hm~(-2) a~(-1)及1835.29、87.87、51.17、12.12、3.90、1.95 kg hm~(-2) a~(-1);其新鲜凋落物及现存凋落物的C∶N∶P分别为1307.33∶27.73∶1及976.48∶26.77∶1,新鲜凋落物的C∶N、C∶P显著高于现存凋落物,N∶P无显著区别。研究表明,新鲜凋落物与现存凋落物养分含量之间的差异与不同元素在分解过程中的可淋溶性及生物固持等因素有关。该地区常绿落叶阔叶混交林凋落物养分归还量及养分储量相对于亚热带阔叶林平均水平较低;且显著低于喀斯特地区同类型森林,主要与其凋落物产量、降水量及植被类型有关。该森林生态系统新鲜凋落叶与中国及全球范围内阔叶树种凋落叶相比C∶N较低,C∶P、N∶P较高,这可能是由于该地区N沉降及P限制现象较为严重所致。     

Intraspecific variability in response to phosphorus depleted conditions in the cyanobacteria Microcystis aeruginosa and Raphidiopsis raciborskii

Phosphorus loading plays an important role in the occurrence of cyanobacterial blooms and understanding how this nutrient affects the physiology of cyanobacteria is imperative to manage these phenomena. Microcystis aeruginosa and Raphidiopsis raciborskii are cyanobacterial species that form potentially toxic blooms in freshwater ecosystems worldwide. Blooms comprise numerous strains with high trait variability, which can contribute to the widespread distribution of these species. Here, we explored the intraspecific variability in response to phosphorus depleted conditions (P-) testing five strains of each species. Strains could be differentiated by cell volume or genetic profiles except for those of the same species, sampling location and date, though these presented differences in their response to (P-). Although differently affected by (P-) over 10 days, all strains were able to grow and maintain photosynthetic activity. For most M. aeruginosa and R. raciborskii strains growth rates were not significantly different comparing (P+) and (P-) conditions. After ten days in (P-), only one M. aeruginosa strain and two R. raciborskii strains showed reduction in biovolume yield as compared to (P+) but in most strains chlorophyll-a concentrations were lower in (P-) than in (P+). Reduced photosystem II efficiency was found for only one R. raciborskii strain while all M. aeruginosa strains were affected. Only two M. aeruginosa and one R. raciborskii strain increased alkaline phosphatase activity under (P-) as compared to (P+). Variation in P-uptake was also observed but comparison among strains yielded homogeneous groups comprised of representatives of both species. Comparing the response of each species as a whole, the (P-) condition affected growth rate, biovolume yield and chlorophyll yield. However, these parameters revealed variation among strains of the same species to the extent that differences between M. aeruginosa and R. raciborskii were not significant. Taken together, these results do not support the idea that R. raciborskii, as a species, can withstand phosphorus limitation better than M. aeruginosa and also point that the level of intraspecific variation may preclude generalizations based on studies that use only one or few strains.     

Cyanobacterial bioactive metabolites—A review of their chemistry and biology

Cyanobacterial blooms occur when algal densities exceed baseline population concentrations. Cyanobacteria can produce a large number of secondary metabolites. Odorous metabolites affect the smell and flavor of aquatic animals, whereas bioactive metabolites cause a range of lethal and sub-lethal effects in plants, invertebrates, and vertebrates, including humans. Herein, the bioactivity, chemistry, origin, and biosynthesis of these cyanobacterial secondary metabolites were reviewed. With recent revision of cyanobacterial taxonomy by Anagnostidis and Komárek as part of the Süβwasserflora von Mitteleuropa volumes 19(1–3), names of many cyanobacteria that produce bioactive compounds have changed, thereby confusing readers. The original and new nomenclature are included in this review to clarify the origins of cyanobacterial bioactive compounds.Due to structural similarity, the 157 known bioactive classes produced by cyanobacteria have been condensed to 55 classes. This review will provide a basis for more formal procedures to adopt a logical naming system. This review is needed for efficient management of water resources to understand, identify, and manage cyanobacterial harmful algal bloom impacts.     

Localized High‐Concentration Electrolytes Boost Potassium Storage in High‐Loading Graphite

Reversible intercalation of potassium‐ion (K⁺) into graphite makes it a promising anode material for rechargeable potassium‐ion batteries (PIBs). However, the current graphite anodes in PIBs often suffer from poor cyclic stability with low coulombic efficiency. A stable solid electrolyte interphase (SEI) is necessary for stabilizing the large interlayer expansion during K⁺ insertion. Herein, a localized high‐concentration electrolyte (LHCE) is designed by adding a highly fluorinated ether into the concentrated potassium bis(fluorosulfonyl)imide/dimethoxyethane, which forms a durable SEI on the graphite surface and enables highly reversible K⁺ intercalation/deintercalation without solvent cointercalation. Furthermore, this LHCE shows a high ionic conductivity (13.6 mS cm^?1) and excellent oxidation stability up to 5.3 V (vs K⁺/K), which enables compatibility with high‐voltage cathodes. The kinetics study reveals that K⁺ intercalation/deintercalation does not follow the same pathway. The potassiated graphite exhibits excellent depotassiation rate capability, while the formation of a low stage intercalation compound is the rate‐limiting step during potassiation.     

Lithium Dendrites Inhibition via Diffusion Enhancement

The dendritic structure is a disastrous problem of lithium metal batteries as well as other metal rechargeable batteries. The dendritic structures are usually caused by diffusion limitation. Here, a novel strategy is reported to inhibit lithium dendrites based on the understanding of their formation mechanism. An alternating current field perpendicular to the anode is set up, which promotes Li⁺ movement along the anode surface and prevents ions' deposition on the tips from forming dendrites. Furthermore, an external direct current field parallel to the current is employed, which accelerates the transport of Li⁺ in electrolytes to mitigate the concentration gradient nearby the anode and thus inhibits the formation of dendritic structures. A simultaneous employment of these two fields gains five times increase of the lifespan of batteries at the high charging current density of 2 mA cm^?2, confirming the effectiveness of this strategy in protecting the metal anode and inhibiting lithium dendrites. This strategy may have a wide feasibility since it does not change the materials and structures of batteries.     

Highly Solvating Electrolytes for Lithium–Sulfur Batteries

There is a critical need to evaluate lithium–sulfur (Li–S) batteries with practically relevant high sulfur loadings and minimal electrolyte. Under such conditions, the concentration of soluble polysulfide intermediates in the electrolyte drastically increases, which can alter the fundamental nature of the solution‐mediated discharge and thereby the total sulfur utilization. In this work, an investigation into various high donor number (DN) electrolytes that allow for increased polysulfide dissolution is presented, and the way in which this property may in fact be necessary for increasing sulfur utilization at low electrolyte and high loading conditions is demonstrated. The solvents dimethylacetamide, dimethyl sulfoxide, and 1‐methylimidazole are holistically evaluated against dimethoxyethane as electrolyte co‐solvents in Li–S cells, and they are used to investigate chemical and electrochemical properties of polysulfide species at both dilute and practically relevant conditions. The nature of speciation exhibited by lithium polysulfides is found to vary significantly between these concentrations, particularly with regard to the S₃^?? species. Furthermore, the extent of the instability in conventional electrolyte solvents and high DN solvents with both lithium metal and polysulfides is thoroughly investigated. These studies establish a basis for future efforts into rationally designing an optimal electrolyte for a lean electrolyte, high energy density Li–S battery.     

Diffusional interaction behavior of NSAIDs in lipid bilayer membrane using molecular dynamics (MD) simulation: Aspirin and Ibuprofen

In this research, for the first time, molecular dynamics (MD) method was used to simulate aspirin and ibuprofen at various concentrations and in neutral and charged states. Effects of the concentration (dosage), charge state, and existence of an integral protein in the membrane on the diffusion rate of drug molecules into lipid bilayer membrane were investigated on 11 systems, for which the parameters indicating diffusion rate and those affecting the rate were evaluated. Considering the diffusion rate, a suitable score was assigned to each system, based on which, analysis of variance (ANOVA) was performed. By calculating the effect size of the indicative parameters and total scores, an optimum system with the highest diffusion rate was determined. Consequently, diffusion rate controlling parameters were obtained: the drug–water hydrogen bond in protein-free systems and protein–drug hydrogen bond in the systems containing protein.